background blog mode you chat blog
RechercherDerniers commentairesle vpn est une bonne option pour les internautes.ht tp://comparati f-vpn.centerbl og.net
Par Comparatif VPN, le 18.09.2014
c'est important pour le vpn.
http:/ /v-p-n.centerb log.net
Par VPN, le 04.03.2014
http://huaweip roducts.blog.c om/
http://ci sco2960switch. centerblog.net
Par cisco2960switch, le 13.12.2013
http://ciscoro uter1921.weebl y.com/http://c isco2960switch .centerblog.ne t
Par cisco2960switch, le 03.12.2013
ws-c2960s-48lp s-l price: http://www.3an etwork.com/cis co-ws-c2960s-4 8lps-l-price_p 17.html
http: //cisco29
Par cisco2960switch, le 31.10.2013
· Cisco 2960: IOS backup setting
· Cisco WS-C2960S-48LPS-L datasheet and price
· The datasheet of Cisco WS-X4648-RJ45V+E
· You shhould limit the application of P2P
· How to Configure the Cisco router for a DHCP router
· Cisco WS-X4624-SFP-E Datasheet and Price
· Question of the Cisco 3750 WS-3750X-12S-E
· The New GLC-SX-MMD Transceiver Overview
· WS-X4524-GBRJ45V EOL, Replacement: WS-X4548-RJ45V+
· Recover WS-C3560X-24P-S Default Factory Settings
· Connect the VPN to Cisco Router
Date de création : 25.09.2013
Dernière mise à jour :
07.01.2014
17 articles
I am trying to configure a new Cisco 1941 router to replace my existing 1841.
The 1841 had a GSM card in it, and the 1941 does as well, as a dial backup for the primary serial connection.
The original 1841 has the following configuration:
interface Cellular0/1/0
no ip address
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer in-band
dialer pool-member 1
dialer-group 1
async mode interactive
crypto map CRYPTO_MAP_Di1
The current configuration for the 1941 is:
interface Cellular0/1/0
no ip address
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer in-band
dialer pool-member 1
async mode interactive
crypto map CRYPTO_MAP_Di1
I am trying to get the 1941 to be configured exactly the same way, however, when I try to change the configuration from "encapsulation slip" to "encapsulation ppp", I get the following error:
Cellular0/1/0: Only SLIP encapsulation supported
Also, note that the original 1841 configuration has the line "dial-group 1", but I get an error on that CLI also of the following, when trying to add that line command.
%Remove Dialer Profile Configuration first
Does anyone have any idea why I cannot change the encapsulation from slip to ppp, and why I get that error trying to issue the dialer-group command?
The new GSM modem does NOT support PPP at all under the newer IOS 15.x, and in addition to that, I have to also change the chat-script to the new AT commands, because ATDT no longer works either.
What about the issue with the dialer-group 1 CLI is was having an issue with?
The solution:
I think the issue with the dialer commands is because you have some dialer config on the interface already. Try removing the following from the Cellular interface...
dialer in-band
dialer pool-member 1
...then try applying the dialer-group command again.
This solution also can be used for the Cisco 2951 router.
More information, please visit:http://www.3anetwork.com/blog